Loading ...
Loading ...
Loading ...
(127,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
When the access key fob is within either of
the operating ranges of the front doors, the
LED indicator on the access key fob
flashes. When the keyless access func-
tions are disabled, the LED indicator does
not flash unless a button on the access key
fob is pressed.
NOTE
. If the access key fob is placed too
close to the vehicle body, the key-
less access functions may not oper-
ate properly. If it does not operate
properly, repeat the operation from
farther away.
. If the access key fob is placed near
the ground or in an elevated location
from the ground, even if it is in the
indicated operating range, the key-
less access function may not oper-
ate properly.
. When the access key fob is within
the operating range, it is possible for
anyone, even someone who is not
carrying the access key fob, to
operate the keyless access function.
Note that the keyless access func-
tion can be operated only by the
door handle, door lock sensor, rear
gate opener button or rear lock
button in the operating range in
which the access key fob is de-
tected.
. It is not possible to lock the doors,
rear gate and fuel filler lid using the
keyless access function when the
access key fob is inside the vehicle.
However, depending on the status of
the access key fob and the environ-
mental conditions, the access key
fob may be locked inside the vehicle.
Before locking the vehicle, make
sure that you have the access key
fob.
. When the battery of the access key
fob is discharged, or when operating
it in a location with strong radio
waves or noise (e.g., near a radio
tower, power plant, broadcast sta-
tion or an area where wireless equip-
ment is used), or while talking on a
cell phone, the operating ranges
may be reduced, or the keyless
access function may not operate.
In such a case, perform the proce-
dure described in “Locking and
Unlocking” �P502.
. The doors may lock or unlock when
the car is being washed or exposed
to a significant amount of water that
touches the door handle while the
key fob is still in the operating range.
! How to lock and unlock
s02ap0108
It is possible to perform the following
operations when you are carrying the
access key fob.
. Lock and unlock the doors and the fuel
filler lid.
. Unlock the trunk lid (Legacy).
. Unlock and lock the rear gate (Outback/
Subaru Outback Wilderness).
NOTE
. It is not possible to lock the doors,
rear gate and fuel filler lid using the
keyless access function when the
push-button ignition switch is in the
“ACC” or “ON” position. Refer to
“Switching Power Status” �P177.
. If the door handle is gripped with a
gloved hand, the door lock may not
be released.
. If the door lock sensor is touched
three times or more repeatedly, the
system will ignore the sensor opera-
tion.
. When performing the locking proce-
dure too quickly, locking may not
complete. After performing the lock-
ing procedure, it is recommended to
pull the rear door handle to confirm
that the doors have been locked.
. If any of the doors (or the rear gate)
are not fully closed, the following
will occur to alert you that the doors
(or the rear gate) are not properly
closed.
– CONTINUED –
Keyless Access with Push-Button Start System
125
2
Keys and Doors
Loading ...
Loading ...
Loading ...