Loading ...
Loading ...
Loading ...
(70,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
8. To remove the child restraint system,
press the release button on the seat-
belt buckle and allow the belt to retract
completely. The belt will return to the
ELR mode.
NOTE
When the child restraint system is no
longer in use, remove it and restore the
ELR function of the retractor. That
function is restored by allowing the
seatbelt to retract fully.
! Installing a forward facing child
restraint system
s01ag0402
WARNING
. NEVER INSTALL A CHILD RE-
STRAINT SYSTEM IN THE FRONT
PASSENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR
DEATH TO THE CHILD BY PLA-
CING THE CHILD’S HEAD TOO
CLOSE TO THE SRS AIRBAG.
. Before installing a child restraint
system, be sure to confirm that
the seatback is securely locked
into place. Otherwise, in an acci-
dent, serious injury or death
could result.
1. Place the child restraint system in the
rear seating position.
2. If the child restraint system makes
contact with the head restraint of the
rear seating position where the child
restraint system is to be installed, raise
the head restraint to the extended
position. If the child restraint system
still makes contact, remove the head
restraint. For details, refer to “Head
Restraint Adjustment” �P45.
CAUTION
Store the head restraint that has
been removed in the trunk (Legacy)
or cargo area (Outback/Subaru
Outback Wilderness). Do not place
the head restraint in the passenger
compartment to prevent it from
being thrown around in the passen-
ger compartment in a sudden stop
Child Restraint Systems
68
Loading ...
Loading ...
Loading ...