Loading ...
Loading ...
Loading ...
(179,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
gine start.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (Legacy)
– Inside the trunk (Legacy)
– At the corner of the cargo area
(Outback/Subaru Outback
Wilderness)
. When operating the push-button
ignition switch or starting the en-
gine, if the access key fob battery is
discharged, perform the procedure
described in “Access Key Fob – If
Access Key Fob Does Not Operate
Properly” �P502. In such a case,
replace the battery immediately. Re-
fer to “Replacing Battery of Access
Key Fob” �P562.
& Switching Power Status
s03bg02
1 Operation indicator
2 Push-button ignition switch
The power status is switched every time
the push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Make sure the select lever is in the “P”
position.
3. Press the push-button ignition switch
without depressing the brake pedal.
Every time the button is pressed, the
power is switched in the sequence of
“OFF”, “ACC”, “ON” and “OFF”. When
the engine is stopped and the push-
button ignition switch is in “ACC” or
“ON”, the operation indicator on the
push-button ignition switch illuminates
in orange.
Power
status
Indicator color Operation
OFF Turned off
Power is turned
off.
ACC Orange
The following
systems can be
used:
audio and ac-
cessory power
outlet.
ON
Orange
(while engine is
stopped)
All electrical
systems can be
used.
Turned off
(while engine is
running)
CAUTION
. To prevent the vehicle battery
from discharging, do not leave
the push-button ignition switch
in the “ON” or “ACC” position for
a long time.
. To avoid a malfunction, observe
the following precautions.
– Do not spill drinks or other
liquids on the push-button
ignition switch.
– CONTINUED –
Push-Button Ignition Switch (Models with Push-Button Start System)
177
3
Instruments and Controls
Loading ...
Loading ...
Loading ...