Loading ...
Loading ...
Loading ...
(592,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
& Tire Care – Maintenance and
Safety Practices
s13ab04
. Check on a daily basis that the
tires are free from serious da-
mage, nails, and stones. At the
same time, check the tires for
abnormal wear.
. Inspect the tire tread regularly
and replace the tires before their
tread wear indicators become
visible. When a tire’s tread wear
indicator becomes visible, the
tire is worn beyond the accepta-
ble limit and must be replaced
immediately. With a tire in this
condition, driving at even low
speeds in wet weather can cause
the vehicle to hydroplane. Possi-
ble resulting loss of vehicle con-
trol can lead to an accident.
. To maximize the life of each tire
and ensure that the tires wear
uniformly, it is best to rotate the
tires every 6,000 miles (10,000
km). Rotating the tires involves
switching the front and rear tires
on the right-hand side of the
vehicle and similarly switching
the front and rear tires on the
left-hand side of the vehicle.
(Each tire must be kept on its
original side of the vehicle.) Re-
place any damaged or unevenly
worn tire at the time of rotation.
After tire rotation, adjust the tire
pressures and make sure the
wheel nuts are correctly tigh-
tened. For information about the
tightening torque and tightening
sequence for the wheel nuts,
refer to “
Flat Tires” �P488.
& Vehicle Load Limit – How to
Determine
s13ab05
The load capacity of your vehicle is
determined by weight, not by avail-
able cargo space. The load limit of
your vehicle is shown on the vehicle
placard attached to the driver’s side
B-pillar. Locate the statement “The
combined weight of occupants and
cargo should never exceed XXX kg
or XXX lbs” on your vehicle’s
placard.
The vehicle placard also shows
seating capacity of your vehicle.
The total load capacity includes the
total weight of driver and all pas-
sengers and their belongings, any
cargo, any optional equipment such
as a trailer hitch, roof rack or bike
carrier, etc., and the tongue load of
a trailer. Therefore cargo capacity
can be calculated by the following
method.
Cargo capacity = Load limit − (total
weight of occupants + total weight
of optional equipment + tongue load
of a trailer (if applicable))
For towing capacity information and
weight limits, refer to “
Trailer Towing
(Outback/Subaru Outback
Wilderness)” �P473.
Tire Information
590
Loading ...
Loading ...
Loading ...