Loading ...
Loading ...
Loading ...
(264,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
parking lights, front side marker lights, rear
side marker lights, tail lights and license
plate lights are on.
“
” position:
Instrument panel illumination, parking
lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights are on.
“
” position: Auto on/off headlights
When the ignition switch is in the “ON”
position, the instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
NOTE
. If the light control switch is in the
“AUTO” position and the headlights
do not turn on when it becomes dark
outside, turn the light switch to the
“
” position. If this happens, have
your vehicle inspected by your
SUBARU dealer as soon as possible.
. The light sensitivity of the auto on/
off headlights can be changed by
operating the center information dis-
play. For details, refer to “Car set-
tings” �P230 (11.6-inch display
models) or “Car Settings icon”
�P250 (dual 7.0-inch display mod-
els). Also, the setting can be chan-
ged by a SUBARU dealer. Consult
your SUBARU dealer for details.
! Auto-on/off wiper-linked headlights
s03ah0106
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off approxi-
mately 1 minute after the wiper stops.
The ON/OFF setting of this function can be
changed by operating the center informa-
tion display. For details, refer to “Car
settings” �P230 (11.6-inch display mod-
els) or “Car Settings icon” �P250 (dual
7.0-inch display models). Also, the setting
can be changed by a SUBARU dealer.
Consult your SUBARU dealer for details.
! Welcome lighting function
s03ah0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning
off the light switch, the welcome light-
ing function may not operate (for
Canada models).
! When approaching
s03ah010301
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking
the doors (for Outback/Subaru Outback
Wilderness, including the rear gate) by
using the remote keyless entry system.
The low beam headlights will remain
illuminated for 30 seconds*
1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
! When exiting
s03ah010302
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of the
following operation is done.
Light Control Switch
262
Loading ...
Loading ...
Loading ...