Loading ...
Loading ...
Loading ...
(147,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
& Key Lock-In Prevention
Function
s02ac06
Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with a front door
open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless
access with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before lock-
ing the doors.
. When getting out of the vehicle from
a rear door, make sure to unlock all
the doors by pushing the unlock
side of the power door locking
switch. If a rear door is unlocked
from the inside door lever then the
door is opened and closed, the Key
lock-in prevention function will be
triggered. All doors will be unlocked,
the Key lock-in prevention warning
indicator “
” will appear and the
warning chime will also sound.
. The factory setting (default setting)
for this function is set as “opera-
tional”. This function’s operational/
non-operational setting can be
changed by a SUBARU dealer. Con-
tact a SUBARU dealer for details.
! Non-operation of key lock-in pre-
vention function
s02ac0602
When the system is set so that it does not
operate, the doors are locked by the
following operation.
. If the lock lever is turned to the front
(“LOCK”) position with the driver’s door
open and the driver’s door is then
closed with the lock lever in that
position, the driver’s door is locked.
. If the spare key is used to lock the
driver’s door from the outside of the
vehicle, the door is locked.
& Battery Drainage Reduction
Function
s02ac03
Under various conditions, lights inside the
vehicle will automatically turn off to reduce
the risk of discharging the battery.
! Battery drainage reduction function
for various conditions
s02ac0302
This function will enter standby mode
under the following conditions:
. The ignition switch is turned to the
“OFF” position (models with “keyless
access with push-button start system”).
. The key is removed from the ignition
key cylinder (models without “keyless
access with push-button start system”).
If the following actions are not performed
within 20 minutes, while the function is in
standby mode, any room lights that are on
will automatically turn off.
Turning
off lights
– Map light
– Dome light
– Ignition switch light*
2
– Cargo area light*
3
– Trunk light*
4
– Rear gate light*
5
– Door courtesy light*
5
– Vanity mirror light
Actions
– Turn the ignition switch to the
“ACC” or “ON” position.
– Open or close the doors, in-
cluding the rear gate.*
3
– Open or close the doors, in-
cluding the trunk.*
4
– Push the unlock button on the
access key fob or transmitter.
– Hold the front door handle and
unlock it while holding the ac-
cess key fob.*
1
– Insert the key into the keyhole of
the ignition switch.*
2
– Come close to the vehicle that
the front door was locked while
holding the access key fob (if
OFF delay timer setting for
period of time is not off).*
1
– Push the panic button on the
access key fob or transmitter.
*1: Models with “keyless access with push-
button start system”
*2: Models without “keyless access with push-
– CONTINUED –
Door Locks
145
2
Keys and Doors
Loading ...
Loading ...
Loading ...