Loading ...
Loading ...
Loading ...
(493,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
11. Insert the jack handle into the jack-
screw, and turn the handle until the tire
clears the ground. Do not raise the
vehicle higher than necessary.
12. Remove the wheel nuts and the flat
tire.
13. Before putting the spare tire on, clean
the mounting surface of the wheel and
hub with a cloth.
14. Put on the spare tire. Replace the
wheel nuts. Tighten them by hand.
WARNING
Do not use oil or grease on the wheel
studs or nuts when the spare tire is
installed. This could cause the nuts
to become loose and lead to an
accident.
15. Turn the jack handle counterclockwise
to lower the vehicle.
16. Use the wheel nut wrench to securely
tighten the wheel nuts to the specified
torque, following the tightening order in
the illustration.
For the wheel nut tightening torque,
refer to “Tires” �P572. Never use your
foot on the wheel nut wrench or a pipe
extension on the wrench because you
may exceed the specified torque. Have
– CONTINUED –
Flat Tires
491
9
In Case of Emergency
Loading ...
Loading ...
Loading ...