Loading ...
Loading ...
Loading ...
(302,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
! Remote control mirror switch
s03ap0302
: Select side to adjust
: Direction control
The remote control mirrors operate when
the ignition switch is in the “ON” or “ACC”
position.
1. Turn the control switch to the side that
you want to adjust. “L” is for the left
mirror, “R” is for the right mirror.
2. Move the control switch in the direction
you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional op-
eration.
NOTE
. The mirrors can also be adjusted
manually.
For models with memory function:
. The outside mirror can be adjusted
for approximately 45 seconds after
the following conditions are met.
– The ignition switch is turned to
the “OFF” position.
– The door is unlocked using the
access key fob.
. The outside mirror angle can be
registered with button “1”, “2” or
each of the key fobs. For details,
refer to “Power driver’s seat with
synchronized outside mirrors mem-
ory function” �P34.
. The outside mirror angle can also be
retrieved with the Driver Monitoring
System user information. To do so,
perform user registration in the
Driver Monitoring System settings.
Refer to “Driver Monitoring System”
�P237.
! Reverse tilt-down feature (if
equipped)
s03ap030201
When backing the vehicle up, the right
and/or left outside mirrors will turn down-
ward automatically to provide better rear
visibility.
1. Push the ignition switch to the ON
position.
2. Move the select lever to the R (Re-
verse) position.
3. The outside mirror angle moves down-
ward.
The outside mirror angle will return to its
original position when the following condi-
tion are met.
. Approximately 9 seconds after the
select lever is moved to any position
other than R (Reverse).
. The ignition switch is turned to the
“OFF” position.
. The vehicle is running.
NOTE
. The reverse tilt-down mirror angle
can be registered with button “1”,
“2” or each of the key fobs. For
details, refer to “Power driver’s seat
with synchronized outside mirrors
memory function” �P34.
. The reverse tilt-down mirror angle
can also be retrieved with the Driver
Monitoring System user informa-
tion. To do so, perform user registra-
tion in the Driver Monitoring System
settings. Refer to “Driver Monitoring
System” �P237.
. The operational/non-operational
setting can be changed by operating
the center information display. For
details, refer to “Car settings”
�P230.
Mirrors
300
Loading ...
Loading ...
Loading ...