Loading ...
Loading ...
Loading ...
(39,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. When the button “1” or “2” is
pressed within 45 seconds after the
driver’s door is opened, the regis-
tered memory position can be re-
trieved even if the ignition switch is
in the “LOCK” or “OFF” position.
. If buttons “1” and “2” are pressed at
the same time, execution of seat
position retrieval may not be possi-
ble.
. When the retrieved position is the
same as the current seat position, a
chirp will sound twice.
! Utilizing of the seat position
registered with access key fob
s01aa020704
1. Hold the registered access key fob.
2. Unlock the driver’s door by pressing
the “
” button or gripping the door
handle.
3. Open the driver’s door.
A chirp sounds and the seat moves to the
registered position.
When the select lever is moved to the “R”
position, the outside mirror will move to the
registered reverse tilt-down position.
NOTE
. If the registered seat position cannot
be retrieved after performing the
previous procedures, try the follow-
ing procedures.
(1) Press the “SET” button on the
driver’s door.
(2) Press the “
” button on the
access key fob or touch the
door lock sensor to lock the
doors.
(3) Perform the prior procedures
again.
. If the keyless access function is
disabled, the seat position cannot
be retrieved by gripping the driver’s
door handle. However, the seat posi-
tion can still be retrieved by pressing
the “
” button on the access key
fob. For information about how to
enable/disable the keyless access
function, refer to “Disabling Keyless
Access Function” �P131.
. If a new position is registered for the
same access key fob, the previously
registered seat position is deleted.
. If you are carrying 2 or more access
keys, seat position retrieval may not
be possible.
! Clearing the registered seat posi-
tion with access key fob
s01aa020705
1. Close the driver’s door.
2. While holding the access key fob and
pressing the “SET” button, press the
“
” button on the access key fob.
A chirp will sound, and the registered seat
position will be cleared.
NOTE
After deleting the seat position, wait for
a few moments before registering a
new seat position.
& Head Restraint Adjustment
s01aa04
WARNING
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints backwards.
– CONTINUED –
Front Seats
37
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...