Loading ...
Loading ...
Loading ...
(378,1)
北米Model "A2630BE-A" EDITED: 2022/ 12/ 23
. When you change the select lever
position, make sure to move the
select lever firmly to the selected
position.
! P (Park)
s07bg0101
This position is for parking the vehicle and
starting the engine. In this position, the
transmission is mechanically locked to
prevent the vehicle from rolling freely.
When you park the vehicle, first apply the
parking brake, then shift into the “P”
position. Do not hold the vehicle with only
the mechanical friction of the transmission.
To shift the select lever from the “P” to any
other position, you should depress the
brake pedal fully then move the select
lever. This prevents the vehicle from
lurching when it is started.
! R (Reverse)
s07bg0102
This position is for backing the vehicle. To
shift from the “N” to “R” position, stop the
vehicle completely then move the lever to
the “R” position while pressing the select
lever button in.
When the ignition switch has been turned
to the “ACC” position, the movement of the
select lever from the “N” to “R” position is
only possible by depressing the brake
pedal. For details, refer to “Shift Lock
Function” �P377.
! N (Neutral)
s07bg0103
This position is for restarting a stalled
engine. In this position, the transmission is
neutral, meaning that the wheels and
transmission are not locked. Therefore,
the vehicle will roll freely, even on the
slightest incline unless the parking brake
or foot brake is applied.
Avoid coasting with the transmission in
neutral. Engine braking has no effect in
this condition.
WARNING
Do not drive the vehicle with the
select lever in the “N” (neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
! D (Drive)
s07bg0104
This position is for normal driving. The
transmission shifts automatically and con-
tinuously into a suitable gear according to
the vehicle speed and the acceleration you
require. Also, while driving up and down a
hill, the transmission assists and controls
the driving performance and engine brak-
ing while corresponding to the road grade.
When more acceleration is required in “D”
position, depress the accelerator pedal
fully to the floor and hold that position. The
transmission will automatically downshift.
In this case, the transmission will operate
like a conventional automatic transmis-
sion. When you release the pedal, the
transmission will return to the original gear
position.
If one of the shift paddles behind the
steering wheel is operated while driving in
the “D” position, the transmission will
temporarily switch to the manual mode.
In this mode, you can shift to any gear
position using the shift paddles. For details
about the manual mode, refer to “Selection
of Manual Mode” �P378. Once the
vehicle speed stabilizes, the transmission
will switch from the manual mode back to
the “D” position for normal driving.
! While climbing a grade
s07bg010401
When driving up a hill, undesired upshift is
prevented from taking place when the
accelerator is released. This minimizes
the chance of subsequent downshifting to
a lower gear when accelerating again. This
prevents repeated upshifting and down-
shifting resulting in a smoother operation
of the vehicle.
Continuously Variable Transmission
376
Loading ...
Loading ...
Loading ...