Loading ...
Loading ...
Loading ...
D
GB
F
NLIEPGRTRRUSSPLCZARA
12. Maintenance and replacement parts
Please note
Replace parts which are subject to wear, such as the rubber gasket and other rubber parts, regularly with original
Fissler spare parts after c. 400 cooking operations or at the latest after two years. Parts which are clearly damaged
(e.g. hardening, cracks, discolorations, overheating, or deformation) or do not fit properly must be replaced immedia-
tely. Failure to do so will result in the efficiency and safety of your pressure cooker being reduced.
Information on replacing parts
Silicone gasket (Fig. A-20)
See Chapter 5.
Silicone membrane (Fig. A-22)
See Fig. V
Remove the control valve unit from the lid and pull the old silicone membrane off the inside of the lid.
Place the new silicone membrane from the inside into the lid hole. Check that it is correctly positioned by rotating it.
Fit the control valve unit (see Section 10).
O-ring (Fig. A-23)
See Fig. W
Release the control valve unit from the lid and remove the old O-ring.
Place the new O-ring in the notch provided around the thread.
Make sure that the O-ring is tightly placed.
Valve base seal (Fig. A-24)
See Fig. X
Detach the control valve unit from the lid and remove the old seal. Put the new seal in place and make sure that the
seal is perfectly flat on both sides of the lid.
O-ring for Euromatic (Fig. A-18)
See Fig. I
The o-ring is removed/mounted on the inside of the lid. Make sure that the ring lies totally in the groove provided
for it.
Euromatic (Fig. A-18)
To remove/mount the Euromatic, you must first remove the lid handle. This is very simple, as you only have to loosen
the screw on the inside of the lid. You can remove the Euromatic from the lid as soon as you have removed the
o-ring. For mounting, guide the new Euromatic without the o-ring through the lid so that the side with the white ball
is on the inside of the lid. Then you can mount the o-ring as described above.
Maintenance and replacement parts
45
Loading ...
Loading ...
Loading ...