Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
67
WWW.SIGLENT.COM
Slope Trigger
The slope trigger looks for a rising or falling transition from one level to another level in
greater than or less than a certain amount of time.
In the oscilloscope, positive slope time is defined as the time difference between the two
crossing points of trigger level line A and B with the positive edge as shown in the figure
below.
1. Press the
Setup
button on the front panel to enter the TRIGGER function menu.
2. Press the
Type
softkey; turn the
Universal Knob
to set select
Slope
and then push the
knob to confirm.
3. Press the
Source
softkey; turn the
Universal Knob
to select the trigger source.
4. Press the
Slope
softkey; turn the
Universal Knob
to set select the desired trigger edge
(rising or falling), and then push down the knob to confirm. The current trigger slope is
displayed at the upper right corner of the screen.
5. Press
Lower Upper
softkey to select the
Lower
or
Upper
trigger level; then turn the
Trigger Level Knob
to adjust the position. The trigger level values are displayed at the
upper right corner of the screen.
The lower trigger level cannot be upper than the upper trigger level. In the trigger
state message box, L1 means the upper trigger lever while L2 means the lower
trigger level.
Loading ...
Loading ...
Loading ...