Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
12
WWW.SIGLENT.COM
Figure 11 4-channel Scope Rear panel Overview
1.
Handle
Pull up the handle vertically for easy carrying of the instrument. When you do not
need the handle, press it down.
2.
LAN
The instrument can be connected to network via this interface to perform remote
control.
3.
USB Device
The oscilloscope support SCPI remote control commands, user can control the
oscilloscope through this interface
4.
USB Host
Communicate with external function generators (
SIGLENT
SDG and SAG1021)
5.
Safety lock Hole
You can lock the instrument to a fixed location using the security lock (please buy it
yourself) via the lock hole.
6.
AC Power Socket
AC power input terminal. The power requirements of this oscilloscope are 100-240 V,
50/60/400 Hz. Use the power cord provided with the instrument to connect it to AC
power.
7.
Pass/Fail or Trigger Out
The BNC port can output a signal that reflects the current waveform capture rate of
the oscilloscope at each trigger or a pass/fail test pulse.
Loading ...
Loading ...
Loading ...