Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
102
WWW.SIGLENT.COM
CAN Trigger
This part will provide a brief introduction and description for the operation of the CAN
trigger.
Trigger Conditions
Start
— the oscilloscope will be triggered at the start bit of a frame.
Remote
— the oscilloscope will be triggered by a remote frame with specified ID.
ID
— the oscilloscope will be triggered by a remote or data frame that have specified
ID.
ID+DATA
— the oscilloscope will be triggered by data frame that have specified ID
and data.
Error
— the oscilloscope will be triggered by an error frame.
Operation Steps
1. Press the
Setup
to enter the
TRIGGER
function menu.
2. Press the
Type
and select
Serial
.
3. Press the
Protocol
and select
CAN
.
4. Press the
Trigger Setting
to enter the
CAN TRIG SET
menu.
5. Press the
Condition
and select the trigger condition by
Universal Knob
:
If you select the
REMOTE
and
ID
condition:
a. Press the
ID
Bits
to set the length of ID (11bits or 29 bits).
b. Press the
Curr ID Byte
and use the
Universal Knob
to select the byte that
you want to set.
c. Press the
ID
and set the ID’s value by the
Universal Knob
.
(
Tips
: In order to make is convenient for the operator to set the parameters, ID b
is split into several bytes. For example, if the ID’s length is 11 bits, it will be split
into two bytes, a byte includes 8 bits. If “1st byte” is selected, only the 8 least
significant bits can be changed.)
If you select the
ID+DATA
condition:
a. Press the
ID bits
softkey to select the ID’s length (11 or 29 bits).
b. Press the
Curr ID Byte
softkey and use
Universal Knob
to select the byte
that you want to modify.
c. Press the
ID
softkey and set the ID’s value by
Universal Knob
.
d. Press the
Data
softkey and set the value of the first byte by
Universal Knob
.
Loading ...
Loading ...
Loading ...