Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
175
WWW.SIGLENT.COM
Output
Connect AWG with USB cable, and the oscilloscope interface indicates "AWG device
connection success", Press the
Utility
→
Next Page4/4
→
AWG
,to enter the function menu
interface of the AWG system as shown below, including: Output, Wave, Setting , System,
Remove Device.
Figure 111 AWG Menu Interface
Press
Output
softkey to open or close the AWG output .When the output is on, the upper
right corner of the oscilloscope interface will displays the corresponding waveform
frequency and amplitude information of AWG output wave.
Wave
To set standard waveform
Press the
Utility
→
Next Page4/4
→
AWG
→
Wave Type
, Rotate the
Universal Knob
to the
Sine wave. Then press the knob to select the interface shown as below:
Figure 112 Wave Type Interfac
The following table shows the waveform type and its corresponding characteristics.
According to the selected waveform, to set the waveform parameters through
Universal
Loading ...
Loading ...
Loading ...