Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
112
WWW.SIGLENT.COM
Note: The REF waveforms are non-volatile. The REF waveform can still be saved
after restarts or default operation.
Save REF Waveform to Internal Memory
Do the following steps to save the REF waveform to internal memory:
1. Press the
REF
button on the
front to enter the REF WAVE function menu. Note that
when the time horizontal format is in X-Y mode, REF function cannot be enabled.
2. Press the
Source
softkey; then, turn the
Universal Knob
to select the source of
reference channel. The source includes analog channel and math waveforms.
3. Press the
Location
softkey; then, turn the
Universal Knob
to select the position to
save the REF waveform. The source includes analog channel and math waveforms.
4. Press the
Save
softkey to save the channel or math waveform to the appointed
location. The vertical scale information and the vertical offset of the waveform will be
saved at the same time. It will pop out the message “
Store Data Success
” when the
waveform has been saved successfully.
Display REF Waveform
To the following steps to display REF waveform:
1. Press the
REF
button on the
front to enter the REF WAVE function menu.
2. Press the
Location
softkey; then, turn the
Universal Knob
to select the REF waveform
that you want to display.
3. Press the
Display
softkey to select
On
to display the REF waveform on the screen.
Only saved location can be displayed. The oscilloscope can display all four reference
waveforms at a time.
Loading ...
Loading ...
Loading ...