Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
94
WWW.SIGLENT.COM
SPI Trigger
This part will provide a brief introduction and description for the operation of the SPI
trigger.
1. Press the
Setup
button to enter the
TRIGGER
function menu.
2. Press the
Type
and select
Serial
.
3. Press the
Protocol
and select
SPI
.
4. Press the
Trigger Setting
softkey.
Figure 48 SPI TRIG SET Menu
5. Press the
Trigger Type
softkey to select the trigger condition.
Function
Menu
Settings
Explanation
Trigger
Type
MISO Master-In, Slave-Out
MOSI Master-Out, Slave-In
Table 2 Menu Explanations of the SPI trigger type
6. Press the Data Length softkey, and turn the Universal Knob to set the length of a data.
The range of data length is 4 to 96 bits.
7. Set the value of the trigger data.
Set the value of a bit:
a. Press the
Bit Roll
softkey to select a bit in data.
b. Press the
Bit Value
softkey to set the value of the selected bit.
Set the value of all bits:
a. Press the
All Same
softkey to set the value of all bits.
Function
Menu
Settings
Explanation
Bit Value
0 High voltage level
1 Low voltage level
X Don’t care the voltage level
Table 3 Menu Explanations of the SPI Bit value
8. Press the
Next Page
softkey.
9. Press the
Bit Order
softkey to set the bit order (MSB or LSB).
Loading ...
Loading ...
Loading ...