Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
195
WWW.SIGLENT.COM
Press the
Load
soft key to switch the load between 50Ω, 75Ω, 600Ω, Hi-Z. It
also can turn the
Universal Knob
to set the load value.
5) Press the
Set Channel
softkey to enter the SET CHANNEL menu.
Press the
DUT Input
softkey to select the corresponding input signal
channel. Press the
DUT Output 1
soft key to select the corresponding output
signal channel, and support up to 3 channels as the signal output.
Press the
Channel Gain
softkey continuously to select the gain type as
“Hold” or “Auto”.
2. Press the
Display
soft key to enter the DISPLAY menu. The display menu displays
the configuration related to bode plot interface.
Figure 130 DISPLAY Menu
1) Press the
Amplitude
softkey to enter the AMPLITUDE menu.
Press the
Scale
softkey and turn the
Universal Knob
to set the amplitude
display scale.
Press the
Ref Level
softkey and turn the
Universal knob
to set the amplitude
display reference level, or press the
Universal knob
directly to enter the
value in the pop-up virtual keyboard.
Press the
Mode
softkey to set the display mode of the amplitude.
Vout/Vin: display the ratio of the DUT output to the DUT input. Press the
Axis Type
softkey to set the vertical axis to logarithmic or linear.
Vout: display the DUT output voltage value directly. Press the
unit
softkey to
set the unit type to Vpp, Vrms, dBV, dBu, dBm, or Arbitrary dB.
Press the
Auto Set
softkey to automatically adjust the vertical direction
parameters based on the Bode plot data.
2) Press the
Phase
softkey to enter the PHASE menu.
Press the
Scale
(
Ref Level
) softkey and turn the
Universal Knob
to set the
phase display scale (phase display reference level), or press the
Universal
Knob
directly to enter the value in the pop-up virtual keyboard.
Press the
Unit
softkey continuously to switch the phase unit to Deg or Rad.
Press the
Auto Set
softkey to automatically adjust the vertical direction
parameters based on the Bode plot data.
3) Press the
Auto Set
softkey to automatically adjust the vertical direction
parameters based on the Bode plot data.
4) Press the
Cursors
soft key to enter the CURSORS menu. See the chapter
"Cursor" for details.
3. Press the
Data
softkey to enter the DATA menu. The data menu displays the
configurations of bode plot measurement results.
Loading ...
Loading ...
Loading ...