Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
177
WWW.SIGLENT.COM
Figure 113 Built-in Arb Interface
Setting
Figure 114 AWG Setting Interface
Output Load
Press
Utility
→
NextPage4/4
→
AWG
→
Setting
→
Output Load
to set High-Z or 50Ω.
Sync Output
Press
Utility
→
NextPage4/4
→
AWG
→
Setting
→
Sync Output,
the AWG provides Sync
output through the [Aux In/Out] connector on the rear panel. When the Sync Output is on,
the port can output a CMOS signal with the same frequency as basic waveforms (except
the Noise and DC), arbitrary waveforms, and modulated waveforms (except external
modulation).
OVP (Over Voltage Protection)
Press
Utility
→
NextPage4/4
→
AWG
→
Setting
→
OVP
to turn on or off the function. If the
Loading ...
Loading ...
Loading ...