Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
172
WWW.SIGLENT.COM
Note
: the internal memory can only save one test mask; save a new test mask will
cover the old one.
2. Press the
Next Page
softkey to go to the second page of the UTILITY function menu.
3. Press the
Pass/Fail
softkey to enter the PASS/FAIL function menu.
4. Press the
Enable Test
softkey to select
On
to enable the pass/ fail test.
5. Press the
Source
softkey to select the desired channel.
6. Press the
Mask Setting
softkey to enter the MASK function menu.
7. Press the
X Mask
or
Y Mask
softkey; and then turn the
Universal Knob to
select the
desired value.
8. Press the
Location
softkey to select
Internal
9. Press the
Save
softkey to save the mask to internal memory.
10. A few second later, it will pop-out the message “
Save to file
Pass/Fail_mask_data.msk!
”
Recall Test Mask from Internal Memory
1. Press the
Utility
button on the front panel to enter the UTILITY function menu.
2. Press the
Next Page
softkey to go to the second page of the UTILITY function menu.
3. Press the
Pass/Fail
softkey to enter the PASS/FAIL function menu.
4. Press the
Enable Test
softkey to select
On
to enable the pass/ fail test.
5. Press the
Mask Setting
softkey to enter the MASK function menu.
6. Press the
Location
softkey to select
Internal.
7. Press the
Load
softkey to recall the saved interval memory.
8. A few second later, it will pop-out the message “
Recalled the Successfully!
” and the
saved mask will be displayed on the screen.
Save Test Mask to External Memory
Do the following steps to save the test mask to external memory:
1. Press the
Utility
button on the front panel to enter the UTILITY function menu.
2. Press the
Next Page
softkey to go to the second page of the UTILITY function menu.
3. Press the
Pass/Fail
softkey to enter the PASS/FAIL function menu.
4. Press the
Enable Test
softkey to select
On
to enable the pass/ fail test.
5. Press the
Source
softkey to select the desired channel.
6. Press the
Mask Setting
softkey to enter the MASK function menu.
7. Press the
X Mask
or
Y Mask
softkey; and then turn the
Universal Knob to
select the
desired value.
8. Press the
Location
softkey to select
External
Loading ...
Loading ...
Loading ...