Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
III
WWW.SIGLENT.COM
Use only the specified fuse.
Do Not Operate Without Covers
Do not operate the instrument with covers or panels removed.
Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by qualified service personnel
before further operations. Any maintenance, adjustment or replacement especially to circuits or
accessories must be performed by
SIGLENT
authorized personnel.
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock, please do not
operate in a humid environment.
Do Not Operate in an Explosive Atmosphere.
In order to avoid damages to the device or personal injuries, it is important to operate the device
away from an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in air, please keep the surface of device clean and
dry.
Handling Safety
Please handle with care during transportation to avoid damages to buttons, knob interfaces and
other parts on the panels.
Only probe assemblies which meet the manufacturer’s specifications shall be used.
When use 2X/…/10000X probe assemblies, the probe assemblies shall be insulated from the
measured circuits by double or reinforced insulation.
All probe assemblies should meet the requirements of UL 61010-031 and CAN/CSA-C22.2 No.
61010-031-07.
Not to position the equipment so that it is difficult to operate the disconnecting device (detachable
plug).
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired
Loading ...
Loading ...
Loading ...