Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
162
WWW.SIGLENT.COM
Digital Bus
Digital channels may be grouped and displayed as a bus, with each value displayed at the
bottom of the display in hex or binary. You can create up two buses.
To configure and display each bus, do the following steps:
1. Press the
Digital
button on the front panel to open the DIGITAL function menu and
display the digital channel waveforms.
2. Press the
Digital Bus
softkey to enter the DIGITALBUS function menu.
Figure 104 DIGITALBUS Function Menu
3. Press the
Bus Select
softkey to select
Bus1
or
Bus 2
.
4. Press the
Display
softkey to select
On
to display the bus at the bottom of the display.
Under the DIGITAL function menu, press the
Cannel Control
softkey, turn the
Universal Knob
to select such as
DX
, and then press the
Dx
softkey to select
On
or
Off
to set the channel to be included or excluded in the bus.
Under the DIGITAL function menu, press the
Channel Group
softkey to select
On
or
Off
to include or exclude all digital channels in this group.
Under the DIGITAL function menu, a status indicator is displayed in the status
line at the bottom of the display. Light blue shows the digital channel is included
in the bus while black shows it is excluded in the bus.
Under the DIGITAL function menu, press the
System Display
softkey to select
Binary
or
Hex
to display the bus values.
The Sampling rate of digital channels is displayed at the right of the display.
Loading ...
Loading ...
Loading ...