Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
101
WWW.SIGLENT.COM
CAN Trigger and Serial Decode
Please in order of “
Setup for CAN Signals
”, “
CAN Trigger
” and “
CAN Serial Decode
” to
trigger and decode the signals.
Setup for CAN Signals
1. Press the
Decode
key to enter the
DECODE
function menu.
2. Press the
Decode
softkey and select the desired slot (Decode1 or Decode2).
3. Press the
Protocol
softkey and then select
CAN
by turning
Universal Knob
.
4. Press the
Signal
softkey to enter the
SIGNAL
menu as Figure 55 shows.
Figure 58CAN SIGNAL Menu
a. Press the
Source
softkey to select the channel that is connected to the CAN
signal.
b. Press the
Threshold
key
to set the CAN signal’s threshold voltage level by
Universal Knob
. The threshold voltage level is for decoding, and it will be regard
as the trigger voltage level when set the trigger type to serial.
5. Press the
Configure
softkey to enter the
BUS CONFIG
menu.
6. Press the
Baud
to set baud rate by
Universal Knob
.
The baud rate can be set as predefined value (from 5kb/s to 1Mb/s) or custom
value (from 5kb/s to 1Mb/s).
If the desired baud rate is not listed, press
Baud
and select
custom
option, press
the
Custom
and turn the
Universal Knob
to set the desired baud rate.
Loading ...
Loading ...
Loading ...