Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
194
WWW.SIGLENT.COM
LAN
Connect the oscilloscope and the external AWG via LAN.
If LAN is selected, press the
Set IP
softkey, and set the IP of AWG in the
pop-up dialog box.
Press the
Connection
Test
softkey to check the connection.
2) Press the
Sweep Type
softkey to select Simple or Vari-level. Press the
Set
Vari-level
softkey to enter the VARI-LEVEL menu.
Figure 129 VARI-LEVEL Menu
Press the
Profile
softkey to select the profile (Profile A~ Profile D).
Press the
Nodes
softkey and turn the
Universal knob
to set the number of
nodes.
Press the
Edit Table
softkey continuously to select the cell and turn the
Universal knob
to select the line. When the cell is selected, set the value by
using the
universal knob
or virtual keyboard. "Freq" indicates the scanning
frequency value while "Ampl" indicates the scanning amplitude.
3) Press the
Set Sweep
softkey to enter SET SWEEP menu.
Press the
Mode
softkey to select the sweep mode.
Linear: it is necessary to set the center frequency and span frequency
Decade: it is necessary to set the start frequency and stop frequency.
Press the
Points
softkey to set the sweep resolution.
4) Press the
Set Stimulus
softkey to enter STIMULUS menu.
Press the
Amplitude
softkey (
Offset
softkey) and turn the
Universal Knob
to
set the amplitude, or press the
Universal Knob
directly to enter the
parameter value in the pop-up virtual keyboard.
Press the
Unit
softkey and turn the
Universal Knob
to select the unit type. It
contains 6 types of Vpp, Vrms, dBV, dBu, dBm, Arbitrary dB. When the unit
type is dB, it is necessary to set the reference level.
Loading ...
Loading ...
Loading ...