Loading ...
Loading ...
Loading ...
165
OPERATION WHEN A JOB IN THE JOB QUEUE IS
COMPLETED
When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the
status column.
Reception jobs, timer transmission jobs, forwarding jobs, and retry jobs are handled as explained below in the job status
screen.
Received jobs
While an Internet fax or a fax is being received, "Receiving" appears.
When reception is completed, the job moves to the completed jobs screen and "In Memory" appears.
After the fax is printed, the status changes to "Printed".
Timer transmission jobs
A timer transmission job appears at the bottom of the job queue until the specified time arrives.
When the specified time arrives, the job is executed. If another job is in progress, the timer job is started when the other
job is completed.
Internet fax transmission jobs that request a receive report
After completion of an Internet fax transmission job that requests a receive report, the job is placed on standby at the
bottom of the job queue screen. "Report Wait" appears in the status column. When the receive report is received from
the destination, or if the report is not received within the timeout time, the job moves to the completed jobs screen.
Reception jobs when "Inbound Routing Settings" are enabled
When "Inbound Routing Settings" are enabled, reception jobs are handled as follows depending on the print setting.
☞ FORWARDING RECEIVED FAXES TO AN E-MAIL ADDRESS (Inbound Routing Settings) (page 153)
• Received fax is not printed
"Receiving" appears while the fax is being received. When reception is completed, the job moves to the job queue of
the job status screen of scan mode.
• Received fax is printed
When reception is completed, the job moves to the complete screen and "In Memory" appears. After the fax is printed,
"Printed" appears. In addition, the job is added to the job queue of the job status screen of scan mode. When
forwarding is finished, "Forward OK" appears.
Retry jobs (fax mode)
A retry job appears at the bottom of the job queue screen. When the set retry interval elapses, the job is executed. If
there are jobs reserved ahead of the retry job, the retry job is reserved at the bottom of the job queue and executed
when its turn arrives.
Loading ...
Loading ...
Loading ...