Loading ...
Loading ...
Loading ...
61
• Alarm Upload: This checkbox allows the user to enable the system to upload alarm information when a motion
detection alarm is triggered.
• Send Email: This checkbox allows the user to enable the system to send an email when an abnormality occurs.
• Buzzer: This checkbox allows the user to enable the system to activate a buzzer when an abnormality occurs.
• Log: Allows the user to log all motion detected events that are triggered in the DVR.
• Voice Prompts (N/A): Allows the user to customize voice prompts for motion detected events.
To save settings, click the Apply button. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand
corner.
User
This screen allows the user to specify actions that occur when there is an abnormality with the DVR’s user options.
Below is a screenshot of the User Abnormality settings screen:
• Event Type: This field allows the user to specify which user abnormality event type they would like to configure
settings for. Login: DVR has reached limit of allowed login attempts
•Enable: This checkbox allows the user to enable the features below for the specified event type.
• Attempts: This is the number of failed attempts set to the DVR before it is locked.
• Lock Time: Set a length of time you would like the DVR to lock to after several failed attempts have occurred.
• Alarm Out: Click Setting to display setting interface.
◼ General Alarm: Enable alarm activation through the alarm DVRs connected to the selected output port.
◼ External Alarm: Enable alarm activation through the connected alarm box.
◼ Wireless Siren: Enable alarm activation through DVRs connected by USB gateway or camera gateway.
• Latch: Set a length of time for the DVR to delay turning off alarm after the external alarm is
cancelled. The value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If you enter 0,
there will be no delay.
• Buzzer: This checkbox allows the user to enable the system to activate a buzzer when an abnormality occurs.
• Log: Allows the user to log all motion detected events that are triggered in the DVR.
• Send Email: This checkbox allows the user to enable the system to send an email when an abnormality
occurs.
Loading ...
Loading ...
Loading ...