Loading ...
Loading ...
Loading ...
55
In the period interface, enter the time frame you would like to set as your period and select the checkbox to
enable the settings. There are a total of six periods that you can set for each day. Under the Copy menu, you can
apply these settings to all days of the week by checking the All option or you can also select specific days as well.
To save the settings in this menu, click OK to continue.
• CAM Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5
to 600 seconds. This time value controls how long the alarm signal lasts. Based on motion detection, a buzzer can
go off, a tour can begin, PTZ can be activated, a snapshot can be taken, or a channel can begin recording.
For example, if the anti-dither time is set to 10 seconds, each alarm may last 10 seconds if the local alarm is
activated. During the process, if the system detects another local alarm signal at the fifth second, the buzzer, tour,
PTZ activation, snapshot, record channel functions will begin another 10 seconds while the screen prompt, alarm
upload, email will not be activated again. After 10 seconds, if system detects another alarm signal, it can generate
a new alarm since the anti-dither time has expired.
• Show Message: This checkbox allows the user to enable the system to show an on-screen message when a
motion detection alarm is triggered.
• Alarm Upload: This checkbox allows the user to enable the system to upload alarm information when a motion
detection alarm is triggered.
• Send Email: This checkbox allows the user to enable the system to send an email when a motion detection
alarm is triggered.
Loading ...
Loading ...
Loading ...