Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/34687464-ds-k6301x-z/bg56.png)
If every payment requires the same amount of money, you can set Payment Mode as
Fixed Amount. Fixed Amount should be set for each payment between 0.00~9999.99. 0
means no limits.
Enable Show Fixed Amount, the amount will be displayed during the payment.
Fixed Times
Pay once when use xed mes payment mode.
When the me reaches the upper limit, the system will issue prompt.
Balance (Min.)
When the balance of the consumer is less than the congured amount, the balance
insucient prompt will be displayed on payment page.
Allowed Time Period of Viewing Payment Data
Set me periods that the operators can view the payment data. For other me duraons,
operators cannot check the payment data.
3.
Click Save.
10.5.10 Set Authencaon Parameters
Click Conguraon → Payment Sengs → Authencaon Sengs .
Note
The funcons vary according to dierent models. Refers to the actual device for details.
Click Save to save the sengs aer the conguraon.
Connuous Face Recognion Interval
The me interval between two connuous face recognions when authencang.
Note
You can input the number from 1 to 10.
Authencaon Interval
Set the device's authencaon interval of the same person when authencang.
10.5.11 Set Card Security
Click Conguraon → Card Sengs → Card Type to enter the sengs page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from geng the data of the access control, you can
enable NFC card to increase the security level of the data.
Payment Terminal User Manual
72
Loading ...
Loading ...
Loading ...