Loading ...
Loading ...
Loading ...
Steps
Note
The funcon should be supported by the device.
1.
Click Conguraon → Network → Network Sengs → Wi-Fi .
Figure 10-4 Wi-Fi Sengs Page
2.
Check Wi-Fi.
3.
Select a Wi-Fi
-
Click
of a Wi-Fi in the list and enter the Wi-Fi password.
-
Click Manual Add and enter a Wi-Fi's name (SSID), security mode, password (WPA). Click OK.
4.
Oponal: Set the WLAN parameters.
1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will
allocate the IP address, subnet mask, default gateway, and DNS server automacally.
5.
Click Save.
Bluetooth Sengs
You can enable bluetooth funcon.
Click Conguraon → Network → Network Sengs → Bluetooth .
Open
Enable Open to enable the bluetooth funcon.
Device Name
You can edit the device name connected to the bluetooth.
Connecon Status
You can view the connecon status.
Payment Terminal User Manual
66
Loading ...
Loading ...
Loading ...