Loading ...
Loading ...
Loading ...
258
12. Connecting to other equipment
Preparations:
• Turn on the camera and computer.
1 Connect the computer and camera with the USB cable.
• Turn on the camera and your computer before connecting.
• Check the plugs orientations and insert them straight. (If they are inserted in the wrong
direction, the plug and socket pins could be bent and cause faulty operation.) Also, do not
insert into the wrong socket. Doing so may damage the camera.
• Do not use any other USB cables except the supplied one.
• A message about charging may be displayed. Wait until the display disappears.
A [USB/CHARGE] socket
B USB cable
C Communicating
• Do not disconnect the USB cable while this is displayed.
2 Press 3/4 to select [PC(Storage)], and then [MENU/SET].
• If [USB Mode] is set to [PC(Storage)] in the [Setup] menu in advance, the camera will be
automatically connected to the computer without displaying the [USB Mode] selection
screen.
3 Copy the images to the computer using the software available for downloading
after registering your camera on the Leica Camera AG homepage.
Transferring images to a computer
• Before removing or inserting the card, turn off the camera and disconnect the USB cable.
Otherwise, damage may be caused to the recorded data.
• Use a sufficiently charged battery.
• If the remaining battery power becomes low while the camera and the computer are
communicating, the alarm beeps.
Disconnect the USB cable safely. Otherwise, data may be destroyed.
Loading ...
Loading ...
Loading ...