Loading ...
Loading ...
Loading ...
236
11. Using the Wi-Fi/Bluetooth function
1 Make a Bluetooth connection to the smartphone. (>226)
2 Operate the smartphone.
• When the camera turns off after [Sleep Mode] is activated during recording, you can reselect
[Shutter Remote Control] on the smartphone to turn it on again. (The following settings are
required.)
– [Remote Wakeup]: [ON]
– [Auto Transfer]: [OFF]
Operating the shutter button with a smartphone via a Bluetooth
connection alone
Wireless connectivity required:
1 Select [ ].
2 Select [Shutter Remote Control].
3 Take pictu res.
• [Shutter Remote Control] is available when the camera on/off switch is set to [ON].
• The monitor screen image of the camera is not available on the smartphone.
About [B] (Bulb)
When you set the shutter speed to [T] (Time), the shutter stays open after
the shutter button is pressed fully (up to approximately 29 minutes).
The shutter will close when the shutter button is pressed again.
Use this when you want to keep the shutter open for a long time to take
pictures of fireworks, a night scene etc.
Operate the smartphone
1 Press [ ] to start recording (Press and hold [ ])
2 Release your finger from [ ] to end recording
• Slide [ ] in the direction of [LOCK] to record with the shutter button fixed
in the fully pressed condition. (Slide [ ] back in the opposite direction or press the shutter
button of the camera to end recording.)
• If Bluetooth is disconnected during the [B] (Bulb) recording, reconnect Bluetooth and perform
the operation to end recording using the smartphone.
• [T] (Time) will be displayed on the camera screen.
Bluetooth
Loading ...
Loading ...
Loading ...