Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 6
Two
Dimensional
Barcodes
pg. 6-11
QR Code
Format:
{command} {type} {x} {y} [M n] [U n]
{data}
<ENDQR>
where:
{command}: Choose from the following:
BARCODE (or B): Prints bar code horizontally.
VBARCODE (or VB): Prints bar code vertically.
{type}:QR
{x}: Horizontal starting position.
{y}: Vertical starting position.
[M n]: QR code model number. Range is 1 or 2. QR Code Model 1 is the original specification, while
QR Code Model 2 is an enhanced form of the symbology. Model 2 provides additional features and
can be automatically differentiated from Model 1. Model 2 is the recommended model and is the
default value.
[U n]: Unit-width/Unit-height of the module.
Range is 1 to 32. Default is 6.
{data}: Describes information required for generating a QR code. See the following examples.
{data} includes some mode selection symbols in addition to actual input data character
string. The type of the input data could be recognized automatically by printer software or set
“manually”. There is a separator (comma) between mode selection symbols and the actual
data.
Data field format for Automatic data type selection:
<Error Correction Level><Mask No.><Data Input Mode (should be “A”)>,<Data Character
String>
Error Correction Level should be one of the following symbols:
H - Ultra high reliability level (Level H);
continued
Loading ...
Loading ...
Loading ...