Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-100
continued
ip.lpd.enable
type: getvar; setvar
This parameter refers to the LPD protocol setting.
LPD communications from the host should be directed to port 515.
getvar result This will return the LPD protocol status. (on or off)
Example
Description This command instructs the printer to respond with the LPD value
Syntax ! U1 getvar “ip.lpd.enable”
Result “on”
setvar choices
“on”, “off”
Default “on”
Example
Description This command instructs the printer to enable the LPD protocol.
Syntax ! U1 setvar “ip.lpd.enable” “on”
Result The LPD protocol will be turned on upon cycling the power or
issuing the device.reset command
Loading ...
Loading ...
Loading ...