Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-144
continued
wlan.leap_mode
type: getvar; setvar
This parameter refers to Cisco LEAP (Lightweight Extensible Authentication Protocol). LEAP provides
secure mutual authentication for a wireless client through a Cisco Aironet Access Point, based on
user information stored on a backend RADIUS (Remote Authentication in Dial-Up User Service) /AAA
(Authentication, Authorization, and Accounting) server.
This parameter is not supported on units with a Frequency Hopping Spread Spectrum (FHSS) radio.
getvar result Returns the LEAP mode.
Example
Description This command instructs the printer to respond with the LEAP
mode
Syntax ! U1 getvar “wlan.leap_mode”
Result “off”
setvar choices
“on”, “off”
Default “off”
Example
Description This command instructs the printer to turn on LEAP mode
Syntax ! U1 setvar “wlan.leap_mode” “on”
Result Sets the LEAP mode to “on”
Loading ...
Loading ...
Loading ...