ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-134

continued

WLAN Parameters

Note: The following “wlan.xxx” parameters cannot be used on certain Cameo and Encore series printers. Cameo “N” and Encore “N” series printers must

instead use the “LAN” command set detailed in Section 12.

wlan.associated

type: getvar

This parameter refers to whether the printer is associated with an access point (AP).

getvar result This will return “yes” if the printer is associated and “no” if the printer is not

associated with the access point.

Example

Description This command instructs the printer to respond with yes or no

Syntax ! U1 getvar “wlan.associated”

Result “yes”

wlan.bssid

type: getvar

Returns the MAC address of the access point with which the printer is associated. This value is only

relevant when “wlan.associated” returns “yes”.

getvar result MAC address of access point

Example

Description Get the MAC address of the AP

Syntax ! U1 getvar “wlan.bssid”

Result “00:d0:f2:57:13:3d”

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth