Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 9
Line Print
Mode
pg. 9-15
CUT and PARTIAL-CUT Command
Alternatively, the printer can simply cut the paper or partially cut the paper. (Partial cut is useful when
the receipt may fall to the floor when the user doesn’t grab it immediately.) At the end of the receipt, put in
a sufficient amount of CR/LF characters, then issue the CUT or PARTIAL-CUT command.
Format:
! U1 CUT
! U1 PARTIAL-CUT
These commands are discussed more fully in Section 8 of this manual)
Bar Codes, Graphics and Lines
Bar Codes:
The printer can create any 1-D bar code in line print mode. The BARCODE command works just like it
would in a label file. See Section 5 of this manual on the BARCODE command for more details.
The BARCODE command is affected by justification commands such as “! U1 CENTER”. See
JUSTIFICATION Commands in section 8 of the manual for more information.
Graphics:
The printer can print PCX formatted graphics files in line print mode. This is not recommended,
however, in order to keep print times to a minimum. The graphic should be loaded into the flash file
system on the printer to achieve maximum printing speed. Please see Section 7 of this manual for more
information on graphics, lines, boxes and PCX Commands.
Format:
! U1 PCX {x coordinate} {y coordinate} !< {filename.pcx}
continued
Loading ...
Loading ...
Loading ...