Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-86
continued
ip.dhcp.cid_value
type: getvar; setvar
This parameter defines the unique value to be used as the client identifier (option 61) if DHCP is enabled
and “ip.dhcp.cid_type” is “1”.
NOTE: This parameter is only applicable if “ip.dhcp.enable” is set to “on”.
getvar result The current client identifier value
Example
Description This command instructs the printer to respond with the client
identifier value
Syntax ! U1 getvar “ip.dhcp.cid_value”
Result “_”
setvar choices
Any text string up to 20 characters in length
Default • If “ip.dhcp.cid_type” is “0” - the default is the printer’s friendly
name (see “device.friendly_name”)
• If “ip.dhcp.cid_type” is “1” - the default is the printer’s MAC
address
Example
Description Change CID value to “PRT001”
Syntax
! U1 setvar “ip.dhcp.cid_value” “PRT001”
Result The next time the printer sends a DHCP request, if “ip.dhcp.
cid_type” is “0”, the client identifier sent will be “ip.dhcp.cid_
prefix” plus “PRT001” e.g. if “ip.dhcp.cid_prefix” is “ZEB”, the
actual client identifier sent will be“ZEBPRT001”
Loading ...
Loading ...
Loading ...