Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-9
continued
bluetooth.authentication
type: getvar; setvar
This parameter sets Bluetooth authentication mode and works in combination with the “bluetooth.
bluetooth_pin” parameter. When authentication is set to “default” a PIN is required to connect to the
printer that is based on the friendly-name. Contact your printer supplier to obtain the algorithm that
generates this PIN.
When authentication is set to “setpin”, the PIN required to connect is set in the “bluetooth.bluetooth_pin”
parameter.
NOTE this parameter and the following “bluetooth.bluetooth_pin” parameter apply only when Bluetooth library versions 1.2.3 or
later are installed in the printer. Refer to “Getting Printer information” in Section 1 for information on obtaining installed printer
software versions
getvar result Current authentication mode setting, “off”, “default”, “setpin”.
Example
Description Get the current Bluetooth authentication mode
Syntax ! U1 getvar “bluetooth.authentication”
Result “off”
setvar choices
“off”, “default”, “setpin”
Default “off”
Example
Description Enable Bluetooth authentication
Syntax ! U1 setvar “bluetooth.authentication” “default”
Result
Printer will enable Bluetooth authentication with
user defined PIN set in the “bluetooth.bluetooth_
pin” parameter
Loading ...
Loading ...
Loading ...