ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 10

Advanced

Utilities

pg. 10-41

continued

• The Com port is set to OPTICAL.

BHT-IR File Transmission

Assume that a label file CIS.DAT has been loaded into the BHT. (Refer to pg. _ for details on loading a

*.DAT file.) The steps to transmit this file via IR are as follows:

1. Depress the 1 / PW / SF keys all at once, then release. The SYSTEM MENU should be displayed. This

menu has 6 options. This power on sequence must be performed every time to boot to the SYSTEM

MENU. A regular power on (PW key) will boot into the BHT application.

2. Select option 3:UPLOAD. Press the ENT key.

The UPLOAD menu should now be displayed. Select option 1:DRIVE A. Press the ENT key.

Use the arrow keys, F5, and F6, to scroll through the menu options to the desired file. (CIS.DAT in our

example) When CIS.DAT is highlighted, press the ENT key.

3. The IR on the BHT should be pointed towards the IR window on the printer. The transfer of data

will power on the printer if it is not already on. When file transfer is complete, ** Completed ** is

displayed for the user and a beep sounds. The file will then print. Press the C key to exit this screen.

4. Continue to press the C key to exit back 1 menu at a time (if desired). The SYSTEM MENU is the top-

level menu.

5. After a successful UPLOAD, the CIS.DAT file must be re-selected again to transfer to the printer.

NOTES: The arrow keys or a numeric keypress can be used to select a menu option. The arrow keys are F5 through F8. A press of the

ENT key usually needs to accompany the option selection. Hold down the PW key for 1 – 2 seconds to turn the BHT o, or let it power

down automatically.

Communication errors can occur infrequently during BHT-IR transmission. If a transmission is unsuccessful, the data. should be re-

sent.

Conguring the BHT for Cable Transmission

The BHT can also be configured for cable communications with Zebra mobile printers using

either the BHT or the BHT-IR protocol. All parameters that must be set are found in the

BHT Set System

> Communication menu option. The following notes apply:

• The protocol type is set to BHT or BHT-IR protocol. Printer default is BHT-IR

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth