Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 8
Advanced
Commands
pg. 8-31
CUT-AT Command
This command is used on printers equipped with a cutter, in conjunction with the CUT or PARTIAL-CUT
commands. This command will instruct the printer to retract the stock by a specified length. Printers not
equipped with a cutter will ignore this command.
This command should not be used on printers that use a thermal transfer ribbon.
Format:
{command} {length}
Where: {command}: CUT-AT
{length}: The unit length the stock should be retracted after performing a cut or partial cut.
CUT-AT Command Example
This example instructs the printer to print a label, perform a form-feed, cut the label, and retract the
stock by 100 dot-lines.
Input:
! 0 200 200 250 1
CENTER
TEXT 7 0 0 20 CUT-AT EXAMPLE
CUT
CUT-AT 100
FORM
PRINT
Loading ...
Loading ...
Loading ...