Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 10
Advanced
Utilities
pg. 10-36
continued
Status Code (hex) Definition
CC No acknowledge from the 12C synchronous card
CD Generic error during exchange with an 12C synchronous
card
E1 Card clock frequency not accepted (after a set_clock_card
command)
E2 UART overflow
E3 Supply voltage drop-off
E4 Temperature alarm
E9 Framing error
F0 Serial LRC error
F1 At least one command frame has been lost
FF Serial timeout
‘Set-Get-Do’ (SGD) Commands for Smart Card:
The following SGD commands are supported for Smart Card operations on Road Warrior models:
! U1 setvar “scard.activate” “<OPTION>”
Where <OPTION> is any of the following:
‘BELL_ON’: When enabled the printer will ‘beep’ after a card is powered on. The printer will also ‘beep’
after a card is powered off or removed.
‘LIGHT_ON’: When enabled the printer’s LCD will flash once after a card is powered on. The LCD will also
flash once the card is removed.
‘BELL_OFF’: Disables the ‘BELL_ON’ feature described above.
‘LIGHT_OFF’: Disables the ‘LIGHT_ON’ feature described above.
Loading ...
Loading ...
Loading ...