ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 13

Programming

the Display

Option

pg. 13-5

Example 2:

This example is not a complete menu setup it is a sample card. It is meant as a tool to break down the

tags and explain their use.

Comments

<!—***************************************—>

<!—********SetupCommBaudCard*********—>

<!—***************************************—>

Begin card, the card name is baud, the title is “Com,Baud”, when the 20 second timer expires go to the card called status.

<cardid=”baud”title=”Com,Baud”ontimer=”#status”><timervalue=”200”></timer>

Display the current baud rate after four spaces.

$(vnd.zo.comm.baud)

Do a line break

Display 9600 and put three spaces after it, if 9600 is selected then execute the setvar command to change the baud rate to

9600 in the <do> ... </do> and refresh the display.

<dotype=”accept”label=”9600”>

<setvarname=”vnd.zo.comm.baud”value=”9600”/><refresh/>

</do>

Display 19200, if 19200 is selected then execute the setvar command to change the baud rate to 19200 in the <do> ... </do>

and refresh the display.

<dotype=”accept”label=”19200”>

<setvarname=”vnd.zo.comm.baud”value=”19200”/><refresh/>

</do>

Do a line break

Link the card back to the previous menu.

<ahref=”#comm”>Back</a>

Link the card back to the main menu.

<ahref=”#main”>Main</a>

End the card

</card>



continued

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth