ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-191

continued

rd.position.program

Type getvar; setvar

Description This command sets the read/write position of the RFID transponder in vertical (Y axis) dot

rows from the top of the label. Set to 0 (no movement) if the transponder is already in the effective area

without moving the media.

Important • If a label format species a value for this parameter, this value will be used for the programming position for all

subsequent labels until a new position is specied or until the printer is turned o (O) and then back on (I).

getvar results Description

This command instructs the printer to respond with the current

programming position

Example

Syntax ! U1 getvar “rfid.position.program”

Result Printer returns the current programming position

setvar

Description

This command instructs the printer to set the programming

position

Syntax ! U1 setvar “rfid.position.program” “value”

setvar choices

“value” can equal “0” to label length

Default value “(label length minus 1 mm [1/16 in.])”

Example

Syntax ! U1 setvar “rfid.position.program” “15”

Result Programming position is set to “15”

This setvar example shows the programming position being set at 15 dot rows from the top of the label.

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth