Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-93
continued
ip.dhcp.option12_format
type: getvar, setvar
This parameter specifies the value which will be used for option 12 (host name) to be used in the DHCP
discovery packet of the wireless print server.
getvar result
Example
Description This parameter retrieves the value which will be used for option
12 (host name) in the DHCP discovery packet on the wireless
print server.
Syntax ! U1 getvar “ip.dhcp.option12_format”
Result “”
setvar choices
Default “”
Example
Description This parameter instructs the printer to set the value which
will be used for option 12 (host name) to be used in the DHCP
discovery packet of the wireless print server.
Syntax ! U1 setvar “ip.dhcp.option12_format” “value”
Example: This setvar example shows configuring the ip.dhcp.option12_format to the value contained in
the device.friendly_name.
It is necessary to surround the SGD entry to be used as source for the data with the <and> characters.
! U1 setvar “ip.dhcp.option12_format” “<device.friendly_name>”
To further explain, if the above command was issued and the value currently stored in the device.
friendly_name parameter was “ShipPrinter”, then the response to following command would be
“ShipPrinter”:
! U1 getvar “ip.dhcp.option12_value”
Loading ...
Loading ...
Loading ...