ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 10

Advanced

Utilities

pg. 10-24

continued

Track Options:

T1: Read Track 1. (One or more tracks may be specified to read depending on printer model, per note

below)

T2: Read Track 2.

T3: Read Track 3. (Currently not supported by some models. See note below)

NOTES on Track Option for current mobile printer series:

• Cameo 2 CANNOT read track 3. Cameo 2 is capable of reading: Track 1, Track 2, or Tracks 1 AND 2.

• Cameo 3 CAN read three tracks BUT only two tracks at a time: Track 1, Track 2, Track 3, Tracks 1 AND 2, or Tracks 2 AND 3 are

supported. Cameo 3 CANNOT read Tracks 1 and 3 at the same time.

• RW series printers can read all tracks in any combination.

Frequency Options:

MULTIPLE: Read multiple swipes. MCR will continue to read and report card swipes until the MCR

times out. SINGLE read is the default mode.

SINGLE: Read and report one successful card swipe. No data will be reported if the MCR times out

before a successful read. SINGLE read is the default read frequency mode.

Data Reporting Options

QUERY: Report MCR data when queried (In response to MCR-QUERY command, see MCR-QUERY.).

By default, the printer will report MCR data when valid MCR data is decoded before the MCR times

out.

Debugging Options

ECHO: The printer will print the MCR data by internally routing it to the line-printer module, forcing

the data to be printed, as well as being transmitted to the host computer.

Track Data Transmit Options

PREFIX prex: This option specifies the track data prefix. The printer defaults to no prefix. The

PREFIX command should be followed by the data that needs to be sent from the printer to the host,

up to 10 characters, and terminated with space or carriage-return/line-feed characters. An example of

a typical prefix option is “PREFIX START:”.

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth