Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-126
continued
ip.remote_autoconnect
type: getvar; setvar
This parameter will determine whether the printer will attempt to automatically initiate a TCP connection
to a remote server on power-up. If the parameter “ip.remote” has a valid server address and “ip.remote_
autoconnect” is set to “on”, the printer will initiate a TCP connection to the address defined by “ip.remote”
using the destination port number defined by “ip.remote_port”. If “ip.remote_autoconnect” is “on”, the
printer will attempt to maintain a constant connection to this server address. Anytime the connection is
lost, the printer will attempt to re-establish the connection to the remote address.
getvar result The current auto-connect setting
Example
Description Instructs the printer to respond with the currently stored
“ip.remote_autoconnect” status
Syntax ! U1 getvar “ip.remote_autoconnect”
Result “off”
setvar choices
“on”, “off”
Default “off”
Example
Description Instructs the printer to change the ip.remote_autoconnect
status to “on”
Syntax
! U1 setvar “ip.remote_autoconnect” “on”
Result On power up, the printer will initiate a TCP socket connection to
the address defined by “ip.remote”, connecting to the TCP port
number defined by “ip.remote_port.” Anytime the connection
is lost, the printer will automatically attempt to re-establish it
Loading ...
Loading ...
Loading ...