Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-43
continued
Input Parameter
input.capture
type: getvar;setvar
This parameter allows capturing input data in diagnostics mode. Input capture has three modes: “print”,
“run”, and “off”. The “print” and “run” modes can be used to examine data received by the printer.
When in “print” mode the printer will save incoming data to files named “in???.dmp”, where ??? is a
number between 001 to 999. The printer will then print the text and hexadecimal representation of data
bytes received.
When in “run” mode the printer will save captured incoming data to files as above, but will otherwise run
the incoming data/commands normally.
The capture files should be deleted from printer memory after retrieving them. Leaving the printer in
“print” or “run” mode and not deleting the capture files will reduce the printer’s available flash memory.
The “off” mode is the printer’s normal operating mode. Cycling power will also return the printer to “off”
mode.
Loading ...
Loading ...
Loading ...