Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 12
Wireless
Network
Printers
pg. 12-5
GET-CONFIG – This operation causes the printer to report its current WLAN configuration. The two
options are PRINT and REPLY. If PRINT is used, the configuration dump is printed. If REPLY is used,
the configuration dump is sent out over the CABLE. The configuration report is of the following form:
LAN Cong report:
ipAdr = nnn.nnn.nnn.nnn
powerMode = {power mode state}
quiet = {quiet state}
protocol = {protocol selected}
essID = {SSID string}
DHCP = {DHCP state}
DHCP_SAVE = {DHCP_SAVE state}
Where:
nnn.nnn.nnn.nnn = a typical TCP/IP address.
{power mode state} = SAVE or FULL.
{quiet state} =YES or NO. YES means the radio only transmits normal data, NO means the radio
transmits link status information on power up and status change.
{protocol selected} = LPD or TCP.
{SSID string} = the System Set ID string.
{DHCP state} = ON or OFF
{DHCP_SAVE state} = ON or OFF
Syntax: GET-CONFIG {option}
Where {option} = PRINT or REPLY.
Example:
! U1 LAN GET-CONFIG PRINT
continued
Loading ...
Loading ...
Loading ...