Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-115
continued
ip.active_network
type: getvar
This parameter displays if the printer is actively connected to wireless, external wired, or internal wired.
getvar Description This command instructs the printer to respond with what the
printer is currently connected to: internal wired, wireless,
external wired, or unknown. The table below provides details
on the potential return values.
Syntax ! U1 getvar “ip.active_network”
Return Values Details
“internal wired” This is the return value when an internal wired device is
detected.
“wireless” This is the return value when a wireless device is
detected.
“external wired” This is the return value when an external wired device is
detected.
“unknown” This is the return value:
• if the printer has not established a network connection of
any of the devices.
• if you don’t have any of the network devices plugged in.
• if the printer is still trying to establish a connection (i.e. on
wireless it is going through the association process).
Loading ...
Loading ...
Loading ...