Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-182
continued
wlan.security
type: getvar; setvar
This parameter allows you to specify both the wireless encryption type and authentication type in one
command.
getvar result The wireless security value.
Example
Description Gets the printer to return the name and not the type. If an
invalid security mode is entered the printer returns Invalid
Mode.
Syntax ! U1 getvar “wlan.security”
Result “1”
setvar choices
Values: “1” = no wireless security or “none”; “2” = WEP 40-bit or “wep 40-bit”;
“3” = WEP 128-bit or “wep 128-bit”; “4” = EAP-TLS or “eap-tls”; “5” = EAP-TTLS
or “eap-ttls”; “6” = EAP-FAST or “eap-fast”; “7” = PEAP or “peap”; “8”= LEAP
or “leap”; “9” = WPA PSK or “wpa psk”; “10” = WPA EAP-TLS or “wpa eap-tls”;
“11” = WPA EAP-TTLS or “wpa eap-ttls”; “12” = WPA EAP-FAST or “wpa eap-
fast”; “13” = WPA PEAP or “wpa peap”; “14” = WPA LEAP or “wpa leap”; “15” =
Kerberos or “kerberos”
Default “1”
Example
Description Sets the wireless security value.
Syntax ! U1 setvar “wlan.security” “1”
Loading ...
Loading ...
Loading ...